What is the firing order for a 1997 Ford Ranger 4.0L?
cylinder numbers(front to rear) drivers side 456 passenger side 123 firing order is 142536
Is the firing order for a distributor with an Edelbrock manifold different from a stock manifold?
The firing order is the same.
When to change timing belt on 2002 CRV - AFTER hitting 110000 miles?
Are you asking when to change it again or for the first time? I would suggest changing it out at 100,000 miles (even if it looks ok). The last thing you want is to be driving down the road and breaking your timing belt. Change again at 160,000-200,000.
What is firing order for 1991 Ford Ranger 3.0?
http://www.rebuiltautoengines.com/ford-ranger-articles.html You can get it all here with detailed pictures of cylinders and coils
When do I need to change the timing belt on my 1997 Miata?
In California, Mazda says every 105k miles. Everywhere else, they say every 60k. The cars timing belts are exactly the same. Crazy California. The good news, if the belt breaks it won't damage the engine (like some cars). It will leave you stranded though. I don't think I've ever seen one break before 60k (like some older Camrys), but maybe a few before 90k. Change the belt rollers and water pump while you're in there. And have the cam position sensor O-ring changed every 60k, they leak like crazy when they get old (really the only place Miatas like to leak oil). The o-ring is cheap and the labor to change it is easy enough while you're doing the timing belt.
Need firing order for 390 cu inch motor?
The Ford 390 cubic inch firing order is :
1 - 5 - 4 - 2 - 6 - 3 - 7 - 8
--------------------------------------------------------------------
The distributor rotor turns COUNTERCLOCKWISE
---------------------------------------------------------------------
The marked # 1 position on the distributor cap faces to the REAR and slightly towards the drivers side
----------------------------------------------------------------------
The engine cylinders / spark plug locations are numbered :
firewall
4 - 8
3 - 7
2 - 6
1 - 5
front
What is the firing order for a 1992 Chevy cavalier 3.1 engine?
Firing order; 1-2-3-4-5-6
************* Firewall ************
(Passenger Side) 5 * 6 (Drivers Side)
(Passenger Side) 3 * 4 (Drivers Side)
(Passenger Side) 1 * 2 (Drivers Side)
************* Radiator ************
What problems do 1995 Mercury Cougar xr7 transmissions have?
The most common problem for the 1995 Cougar xr7 Transmissions is the shift selenoids and the TCM Transmission control modules needing to be reprogramed common fixes for the shift control module would be a transmission overhaul or replacement do to the fact of the shift control module is located inside of the transmission and as well another cost effective fix is to get the transmission control module reprogrammed.
glass that is capable of retaining its
integrity in an opening after being exposed to fire.
Firing order for 1968 Plymouth satellite 273?
A 1968 Plymouth satellite 273 is a classic automobile. Its firing order is 1 5 3 6 2 4.
How much does a 1986 Chevrolet s10 2.8L v6 weigh?
the same as a boat anchor!! LOL i have a 86 s10 2.8 xcab 4x4 and im trying to find the same thing. sticker on the door is their but the only thing legible is the "born on" date. so far i found 4500lbs but i just read a 1997k1500 xcab with 350 weighs in at 4700 so 4500 cant be right. if yours is also on the "rust through diet" I know it`ll weigh less anyway lol
What is the best year for the Lincoln Town Car between 1990-1999?
the 1999 came with traction control, side air bags, sound processed alpine stereo & CD changer stock. they also have bigger brakes, 16 inch tires & wheels.better lighting. the lowest wind resistance of all designs. it was also the last full frame, rear wheel drive town car model.
Answer1998 and newer had larger brakes, that's a plus. But they look like a slightly oversized Toyota or Mazda. Also, starting in 1998, Ford reduced quality of the interior (upholstery, seats, etc) a bit.The 1990 had the old 5.0 liter pushrod engine and the old AOD transmission. They made the change to the 4.6 overhead cam egine in 1991 and pretty much all 1992 and newer have the AODE transmissions.
Also, most owners rate the 1993 - 1997 Town Cars as the best of the lot. We have both a 1994 and a 2003 Town Cars and wholeheatedly agree with those comments, incidently.
If you are looking for comfort, reliable, and easy to work on buy the 87-89 town car. With regular oil changes, transmission every 50,000 miles those cars will last forvever. I have 300,000 on mine and stil running like a watch. I love it. keep it tuned and you get 26 miles to the gallon.
Answer90.. only year with the newer body yet still had the most reliable engine ever.. the 5.0I would say the 95. The 90 had the 150hp 5.0L and the AOD which isn't the strongest trans out there. 91-early 92 got the 4.6L but still had the AOD. Most 92's and all 93 and 94's had the AODE. Better than the AOD but not by much. If not perfectly maintained, expect replacement before 150k miles. In 95 they went from the AODE to the 4R70W which is basically a stronger, updated AODE and doesn't seem to be as picky about perfect maintenance. In 96, they got the plastic intake manifold that will crack on you. Not a maybe thing. They all do at some point, just a matter of how lucky you are. From 96-01 they all came with the plastic intake although an updated replacement is available. The dealer will probably charge in the neighborhood of $800+ to fix it for you. In 98+ the interiors were heavily downgraded to the point of being very uncomfortable if your used to an older one. If you are coming from any other car out there, it is perfectly fine but to go from an 80's or early 90's Towncar to a 98+ is aweful. As far as reliability, the 4.6's regularly go 500k+ with just regular maintenance in Limo service. I have over 200k on mine and she still loves eating the rear tires off.
AnswerI have a 1994 TC with about 247k on it, still runs like a champ, although she's starting to let her age be known (heater core blew a few months ago, radiator sprung a leak the other day., etc.)Kind of hard to see the timing marks while the engine is running if you don't have a timing light. Don't know what year or make your vehicle is, but if it is an older model, you can "set" the timing by ear by rotating the distributor slowly clockwise and/or clockwise until you get the best "purr" of the engine. This method should suffice until you can get a timing light for more precise setting. but if the car want start how do you check it
What is the firing order for a 1995 Toyota Tacoma 4 cylinder?
The firing order for a 1995 Toyota Tacoma 4 cylinder is 1, 2, 3, 4, 5, 6. There is no distributor, and the number one cylinder is on the front left as you face it.
What is Firing Order on 1966 Mustang?
If it is a 302 it is 1-3-7-2-6-5-4-8 and if it is a 289 its 1-5-4-2-6-3-7-8
( the only thing is there wasn't a 302 high output available in a 1966 Ford Mustang and
if it is the 200 cubic inch straight 6 cylinder it's ( 1 - 5 - 3 - 6 - 2 - 4 )
Torque settings for v6 commodore vs 1997?
Torque Setting for VS Commodore Harmonic Balancer Bolt- between 270-320 NM. The Best way is to check the bolt torque setting before you remove it.
What is the degrees before top dead center timing for 1993 Chevy 350 motor?
TDC (top Dead Center) or 0 degrees if everything is stock. but to adjust it you must unplug the tan wire w/black stripe located on the firewall(pass side)next to the fuel and other relays. the computer automatically advances the timing electronically.
What is the firing order of a 2001 Mercury Villager 3.3?
The firing order is 1-2-3-4-5-6, believe it or not.
========================================
Just adding to the answer :
The engine cylinders on a Mercury Villager V6 are numbered :
firewall
1-----3-----5
2-----4-----6
front of vehicle