0
Dodge Durango
The Dodge Durango was a full size SUV (sport utility vehicle) manufactured by Chrysler for the Dodge brand. Produced in the company’s assembly plant in Newark, Delaware, this 8-passenger vehicle was initially powered by a 5.9 liter Magnum V8 engine.
3,297 Questions
How do you replace the water pump on a 1988 GMC Jimmy?
I replaced the water pump on our 98 jimmy last motnth you will need to star with removing the raditor and the fan clutch fan. Once these items are removed you will have a clear picture on the water pump and the bolts that need to be removed.I am not a gear head and this took me two hours from start to finish.
Where is the throttle position sensor on a 2005 4.7L dodge durango?
It is located on the throttle body on the opposite side from the throttle cables.
On a 79 F350 4X4 can you change the front hub to make it a dually or is there more to it?
What is red emergency start light on dash for on a 1993 rockwood motor home?
It is to start the vehicle if the "main" battery is dead, in other words, there are additional batteries that power the lights, etc. in the motorhome, and a battery that is reserved for the engine. If this "engine" battery dies, the motorhome can still be started - hooray - by pushing this button which uses the other batteries to start the engine. We experienced this first hand on a cross country trip. Another piece of information that we didn't know - the generator will not run if there is less than 1/4 tank of gas, so always gas up before you are that low - we learned the hard way when we got a flat tire in Oklahoma City in July on a 100+ degree day and could not run the A/C through the generator while we were waiting for road service. Good luck! We have a 1993 30 foot Rockwood.
WHAT IS THE Electric coolant pump 2001 durango heater?
The electric coolant pump in the 2001 Dodge Durango is designed to help heater coolant flow during warm up conditions and low engine speed conditions (idle). The pump operates as a booster pump to expedite cabin warm up and prevent cabin temperature fluctuation.. It is located on the passenger's side of the under hood area next to the frame rail. The pump is manufactered by bosch.
What type of freon does your 1999 Dodge durango take?
A 1999 uses R134A for the air conditioning system. This is the "new" stuff that you can find at any parts store.
How many miles can you get out of a full tank in a dodge durango with a hemi engine?
I have a 2005 with a hemi and I get between 17-18.5 mpg. So I get somewhere around 400 miles to the tank give or take.
How do you replace the spark plugs on a 1998 Dodge Durango?
One at a time.Gap 40 ,antsiest the threads on new plugs going in.Not real tight.Be careful not to move, and bend wires to much, may cause breaks.
Were exacly is the chip in a Dodge Durango located at?
Chip? Dodge does not have any replaceable "chips" in any of its computers.
How do you turn the AC on in a 1995 dodge Neon New car NO manual?
The first knob controls the fan speed. The second selects the temperature. The third selects which vent it will come out of. And the last will select recirculated or outside air. Turning them all to the left will give you max AC.
Where the DPF Differitial Pressure Sensor on a 2000 Ford E-150 4.2 Engine Whats it look like?
It will be located along the intake manifold. It will look sort of rectangular. Metal usually. It will have two vacuum hoses connected to it along with a electrical connection. Just remove these and label the vacuum hoses remove the two screws and it comes off. (I thnk it is two or three screws) Sorry cant remenber exactly how many screws.
Where do you put anti frezze in 98 Dodge Durango?
Add coolant, with a cold engine for safety, through the "radiator" cap in the upper hose.
Add coolant, with a cold engine for safety, through the "radiator" cap in the upper hose.
What is the angle of approach of the 2003 Dodge Durango?
The 2003 Dodge Durango has a 23.8 degrees angle of approach.
Should the timing belt be replaced when changing the water pump on a 1996 Jeep Cherokee?
Ahhh, good question and the answer is YES! IN order to get to the water pump you have to take off the belt. I know this because I had the water pump replaced earlier in the year and had them put on a new belt. I asked them what was involved they said they would have to remove the belt. I then asked if I just buy a belt and give it to you will you put it on no additional charge since you have to remove the current one anyway? They said yes and got out with it free.
Its always a good idea to ask what is involved with a repair process just in case you can get a few things fixed along the way. IN this case it saved me about $75 bucks because it would take an hour down the road to replace the belt (not including the part price) so if I know that there will be a part that will need to be replaced in the near future and it must be removed from the car while doign another repair, might as well get it done then. If you have a trustworthy repair man they won't charge you extra.
I would always do any type of additional replacements of any parts that will deteorate over time when getting other services done that require removal of the part in question.
Jeep Cherokee AnswerThis answer is partially in error - but with good intentions. What needs to be replaced is the serpentine belt ($20 - 30) and yes, I would replace it anytime I had to remove the old one for survive (alternator, water pump, power steering, etc). You do not have a timing belt on your Jeep, it is a timing CHAIN, so you should not have the maintenance associated with autos that have an over head cam.How do you replace the belt tensioner on a 1999 dodge durango?
I did this a few years ago on my 2000 Durango. This was very straightforward and a little difficult. Bought the part from the dealer - about $135 if I remember correctly. I then just removed the serpentine belt and unbolted and removed the existing tensioner. This was easy so far. I then tried to put the new one in. Very difficult to get the bolts in. Tried removing brackets in the way - this didn't really help. I just kept at it and finally got everything together. Good luck. I did this a few years ago on my 2000 Durango. This was very straightforward and a little difficult. Bought the part from the dealer - about $135 if I remember correctly. I then just removed the serpentine belt and unbolted and removed the existing tensioner. This was easy so far. I then tried to put the new one in. Very difficult to get the bolts in. Tried removing brackets in the way - this didn't really help. I just kept at it and finally got everything together. Good luck.
Heating cooling vacuum layout 2000 Dodge Durango?
How to replace the inside Spectra Heater Core on a 2000 dodge durango??
sometimes is the main control that is bad
What is the roaring noise on your 2004 Dodge Durango?
If its a metal to metal sound its probably a wheel bearing
What is no bus on dash 2001 dodge dadoka?
The "bus" is the system the computer on the vehicle use to communicate. No bus means that you can't communicate with any of the modules and the modules can't communicate with one another. You either have a bad module or an interruption somewhere in the bus.
How do you change a 1999 Dodge Durango headlight?
you need to remove the small screw on the park /turn assembly from the front. then you have access to the 2 bolts on the bottom of the h/light then two higher up on either side.Ron
Where is the pcv valve on a Dodge Durango?
On a 2000 Durango V8 the PCV is located on the side of the oil fill tube under the cap
Where is the thermostat located on a 2000 4.7 v8 dodge durango?
The thermostat is located on the bottom of the the timing cover. crawl under the front end and look for the hose and housing. Its right in the front of the block.
