Oldsmobile Cutlass 442

In 1985, a total of 4,162 Oldsmobile 442 models were produced. This version of the 442 was part of the third generation, which had shifted from its muscle car roots to a more performance-oriented luxury vehicle. The 1985 model featured a 5.0-liter V8 engine and was available in both coupe and convertible body styles.

The signal light flasher on a 1998 Lincoln Town Car is typically located under the dashboard, near the steering column. It is often found in the fuse box or mounted directly to the steering column. To access it, you may need to remove the lower dash panel. It's advisable to consult the vehicle's service manual for specific details and diagrams.

A front bumper for a 1971 Oldsmobile Cutlass typically weighs around 30 to 40 pounds (14 to 18 kg). The exact weight can vary slightly depending on factors like the material and whether it includes additional components such as brackets or mounting hardware. It's best to consult specific service manuals or parts suppliers for precise measurements.

On a 2002 Chrysler Concorde, the fuel filter is typically located along the fuel line beneath the vehicle, near the fuel tank or along the frame rail. It's often mounted to the chassis or near the fuel pump. For accurate location, consult the vehicle's service manual or check under the car for a cylindrical or rectangular filter connected to the fuel lines. Always ensure safety precautions are taken when working on fuel systems.

On a 1995 Oldsmobile Cutlass Supreme, the brake relay is typically located in the fuse box under the dashboard on the driver's side. You may need to remove the cover of the fuse box to access the relays. Refer to the owner's manual for a diagram to identify the specific relay for the brakes. If you're having trouble finding it, inspecting the fuse box for a labeled diagram can be helpful.

To convert your 1971 Olds 350 Rocket to a full roller rocker setup, you'll need to replace the stock rocker arms with full roller rockers designed for your engine. Start by removing the valve covers and rocker arms, then install the new roller rockers, ensuring proper alignment and clearance with the pushrods and valves. It's also advisable to use compatible pushrods and check the geometry to ensure optimal performance. Finally, reassemble everything, double-checking torque specifications, and adjust the valve lash as necessary.

A misfire in all gears around 1800 RPM could indicate several issues, including a faulty ignition system (such as spark plugs or ignition coils), fuel delivery problems (like a clogged fuel filter or failing fuel pump), or even issues with the engine's air intake system (such as a dirty air filter or malfunctioning mass airflow sensor). Additionally, it may be related to engine management issues, such as a bad sensor or a problem with the engine control unit (ECU). To diagnose the issue accurately, a comprehensive inspection and diagnostic scan for error codes are recommended.

The 1987 Oldsmobile Cutlass Supreme and Cutlass Salon are both part of the Cutlass lineup but differ primarily in their design and positioning. The Cutlass Supreme is a more upscale model, featuring a more refined interior, additional luxury options, and a sportier appearance. In contrast, the Cutlass Salon is positioned as a more budget-friendly option with simpler styling and fewer premium features. Both models share similar mechanical components, but the Supreme typically offers a more powerful engine option.

The spark plug gap for a 1989 Mercedes Benz 300E is typically set at 0.028 to 0.032 inches (0.7 to 0.8 mm). It's important to check the specifications in the owner's manual or service manual, as variations can exist based on specific engine configurations. Proper gap settings ensure optimal performance and fuel efficiency. Always use the recommended spark plugs for best results.

The paint code for a 1974 Yamaha TY 250 is generally referred to as "Yamaha Red," which is often identified by the code 3B1. However, specific variations may exist depending on the model and production run. It's always best to verify with a Yamaha dealer or restoration guide for the most accurate information.

The 1997 Oldsmobile Cutlass typically averages around 20 to 25 miles per gallon, depending on the specific model and driving conditions. Factors such as maintenance, driving habits, and whether the vehicle is primarily driven in the city or on the highway can also affect fuel efficiency. Always refer to the owner's manual for the most accurate information for your specific vehicle.

The spark plug gap for an AC R45T spark plug typically ranges from 0.035 to 0.045 inches. For optimal performance, it is often recommended to set the gap at around 0.040 inches, but you should always refer to your vehicle's manufacturer specifications for the most accurate measurement specific to your engine. Proper gap settings ensure efficient combustion and engine performance.

To install a windshield on a 1972 Oldsmobile Cutlass convertible, first, remove any old sealant and trim around the windshield. Clean the channel where the new windshield will sit, then apply a bead of urethane adhesive along the channel. Carefully position the new windshield in place, ensuring it fits snugly, and press it down firmly to create a good seal. Finally, reinstall any trim pieces and allow the adhesive to cure as per the manufacturer's instructions.

The hood decal dimensions for the 1969 Oldsmobile Cutlass 442 typically measure about 24 inches in length and 4 inches in height. The decal features a distinctive design, often including the "442" designation and sometimes additional racing stripes. It's important to note that variations may exist based on specific models and options. Always refer to original documentation or restoration guides for precise specifications.

The paint color code for the 1979 Yamaha XS1100 Special is typically referred to as "Metallic Bronze" or "Brown." The specific color code is often listed as 2D3. However, variations may exist based on manufacturing changes, so it's advisable to check with Yamaha or a reliable restoration source for the exact match.

Well, honey, for that vintage ride of yours, you'll want to stick with good ol' conventional motor oil. Go for a 10W-30 grade to keep that engine purring like a kitten. Just make sure you change it regularly, or that Cutlass might just decide to retire on you.

The gas filter on a 1990 Oldsmobile Cutlass is located along the fuel line, typically underneath the vehicle near the gas tank. It is designed to filter out impurities and debris from the fuel before it reaches the engine. To access and replace the gas filter, you may need to lift the vehicle and locate the filter along the fuel line.

Well, darling, the spark plug gap for a 2002 Mazda Protege 2.0L should be around 0.051 inches. But hey, if you want your car to run smoother than a hot knife through butter, make sure you check your owner's manual or consult a professional. It's not rocket science, just good old-fashioned car maintenance.

Iron replaced bronze in the making of weapons and tools. Iron weapons were stronger and more durable than bronze, leading to the Iron Age. This shift occurred around 1200 BCE.

you will have to remove the rear seat as the pump is located behind the backrest. To remove the back seat, you need an extension for your socket wrench and remove the two nuts which are about centered where each person sits. Then lift up the seat to clear four guide/retaining clips.

Having done that, next lift the cloth well that is glued to the top edge. Now you can see the pump/motor. it will have clear hydraullic lines on both sides and a electrical connection. There is a rubber plug on the side. Turn pump so this faces up. You will need about 2' of rubber hose or a funnel and a coffee can 1/2 full of trans fluid. Pull out the plug and insert hose from can to pump.run top up and down a couple times. This will fill and bleed the air out. You may need to do this 8-10 times. Don't let the motor get hot--it's not made to go more than a couple times without cooling off. Replace plug and inspect lines for leaks.

I have a 95 cutlass supreme, and the pump is visible and accessible from the trunk. Just lift up the cloth bag that the top folds into and you will see it. It is a long reach through the trunk. My plug was on top of the unit, so I did not have to remove the unit; just unplug and refill.

that's an A-body so it should interchange with a chevelle, GTO or tempest, or a buick regal of 67.

Depends on what year 4-4-2 you're referring to...

There is a sticker on the inside of the trunk lid that has that information.

Yes, but the signal lights are the wrong shape.

.35