0
Chevrolet
A brand of vehicle, Chevrolet or Chevy was produced by General Motors Company (GM). The car was named after Louis Chevrolet and was set up to sell a variety of mainstream vehicles to compete with Model T by Henry Ford.
6,429 Questions
How do you change ignition switch in 1995 Chevrolet Silverado?
Really easy. Ignition switch is mounted on top of the steering colum under the dash, 2 small bolts hold it to steering colum, wiring harness plug, and operating rod. Remove wiring harness, two bolts and operating rod, then in reverse order install new switch.
How do you repair loose engine piston in a Chevy 2.2 engine?
Sounds like the engine is going to need a complete rebuild.
How do you program the remote control key fob for cars?
NOTE: There is nearly ALWAYS separate programming for keys & remotes, even if they are one unit. One Exception is newer Chrysler all in one units which are programmed as one unit. These can not be self programmed.
All SMART keyless for remotes - Nissan - Lexus - Toyota - Hyundai - All can NOT be self programmed.
Audi - Nearly All require special equipment for programming for keys & remotes.
BMW - Hit and miss on programming. The keys can NOT be self programmed.
Buicks - Erratic. La Crosse - NO Onboard self Programming Available
Cadillac - Most from 1998 to 2000 require special equipment for programming -
Except Escalade which can be self done. ALL CTS - NO self Programming
Dodge & Chrysler Products - Many require one existing & working remote to program additional units.
If you have no working unit, then special equipment is required to get these done.
There is no "Other" programming available to help you if you have NO existing remote.
Chrysler Crossfire - can NOT be self done - key or remote.
1997 1998 1999 Dakota & Durango - No programming Available.
Dodge Charger - NO self programabilty on board.
All Chrysler combo units, meaning key and remote in one, can NOT be self programmed.
Ford - Nearly ALL KEY programming requires 2 working keys. If you have just one key, You will NOT be able to program additional keys on your own. Nearly ALL Ford Remotes CAN be self programmed. Fords are generally the easiest of all to program.
GM - HHR, Colorado, Cobalt, SSR, Uplander, Canyon, and 2001 & newer Malibu & Malibu Max. These require special equipment for programming. Circle Plus Keys CAN be self programmed.
Some GM Products have a split year whereby part a year may be programmable,
and part may not. There can also be two or more different remotes for some models in the same year.
Hummer H3 2006 and newer
Honda Ridgeline - NO Self Programming
Hyundai Tiburon - THE 2003 TIBURON AND MAYBE MORE ARE INCREDIBLY SIMPLE!!!!!!!!
1. Get in the car and close the door.
2. Turn the key to the ACC posistion
3. Push the unlock button on the remote until the blikers flash once.
4. Get out of the car and test the remote. It should be working fine.
Hyundai Elantra - 2006 and Newer are not self programmable.
Tucson - NO On Board Programming
Jaguar - Most newer vehicles require special equipment for programming. Model S definitely can NOT be self programmed.
Jeep - Grand Cherokees from 1997 to Present require special equipment for programming Cherokees from 1997 to 2001 require special equipment for programming
Land Rover - Nearly ALL require special equipment for programming
Lincoln - LS Model - Some years may require special equipment for programming
We definitely DO have 2003 to 2006 AVAILABLE for self programming.
Mercedes Benz - Some require special equipment for programming for keys & remotes. Many MB dealers are uncooperative & will give you a gigantic run around, and tales abound. We know for a fact that many can be done.
DO YOUR HOMEWORK !
Oldsmobile : 2000 & Up Aurora NO Self programming
Pontiac - G5, G6, 2001 Grand Am & later, Grand Prix 2004 & Later, 2006 & Later Montana Pontiac Solstice - NO On Board Programming
Saab - All Years require special equipment for programming for keys & remotes
Toyota - Prius Silver Logo Smart unit is NOT self programmable.
Volvo - All except early 850, require special equipment for programming
Another case of a lot of hogwash flying around. Some need a code, others DO NOT.
However, some dealers will tell you differently as they do not want to let you off cheap
How do you change a brake light switch on a 83 Chevy pickup?
Under the dash, near the top of the brake pedal arm, you will see the switch. Unplug the wiring from the switch. Unscrew the switch from the arm. The body of the switch is threaded. Screw the new switch in to the arm. Unhook the wiring, and check to see if lights are working correctly. The switch can be adjusted by unplugging wiring, and turning the switch in, or out to adjust when the lights come on, as to pedal movement.
How tall is the 2013 Chevrolet Tahoe?
The height of the 2013 Chevrolet Tahoe is 6 ft. 4.9 in. (76.9 in.).
How do you tighten the power steering pump belt on a 92 Mazda Protege?
The power steering pump is held in place by two bolts one is accessed on the top of the pump body using either an offset wrench or a socket(requires lining up the holes on the pulley with the top bolt). The second bolt is on the bottom of the pump and is actually part of the adjusting mechanism (best reached from underneath the car). There is a bolt on the front of the pump (kind of closer to the radiator) that is the actual adjuster. Loosen the two mounting bolts (do not remove all the way) and tighten or loosen the bolt on front until there is only a quarter inch slack in the belt. Once the proper tension has been placed on the belt tighten the two mounting bolts and you're done.
Where is the cigarette lighter fuse in a Chevy 1994 suburban?
Fuse Box, it says T/G REL and its a 25 amp fuse
What is the push rod order for 3100 v6 Chevy?
What_is_the_push-rod_placement_for_a_1996_lumina_3.1_engine
How to install a coolant temperature sensor?
How do you program a key for a 2008 Chevy uplander?
How do you program a an ignition key for 2008 Chevy truck
What is the value of a 1958 Chevy apache pickup?
Depends on many factors and the most important is condition of the vehicle. Also depends if it is a 6 cylinder or a V8, 4WD or 2WD, A/C or no A/C, A/T or Manual & color. Many things determine value but the most important is condition. Value can be from $1,000 to $50,000. Only you know the condition and the options. Even after you have an estimate of the value, the real value is what someone will pay. Click the link for an estimate.
Location of air intake temperature AIT sensor 1998 Ford Taurus?
it is not an AIT sensor, i believe it is a MAF - Mass air flow sensor, which is located in between the air filter box and the throttle body, it is the only plug between. it is either 2 Phillips or 2 torx bits to remove, along with a plug..
The 1991 Camaro's did not use MAF (Mass Air Flow) in 1988 or 1989 they were changed over to MAP or (Manifold Absolute Pressure) insted. They do however have a AIT sensor. The Z28 models with the Tunded Port Injection motors 305, or 350 both have a AIT that looks almost identical to a Coolant temp sensor. It sits under the intake towards the front. If you have a RS model with the Throttle Body V8 305, then it is located inside the air clener housing on top of the motor. Remove the round lid, and you will see a small bird cage shape dome on the bottom of the air cleaner. it has a retainer ring holding the AIT on, remove it, and it will drop out the bottom of the air cleaner. The V6 model camaro's have the same style AIT but they are threated into the air cleaner box either on the front near the hood latch, or on the passanger side behind the headlight depending on witch style air cleaner, It changed over the years. Will be the only wire coming out of the air cleaner box on the V6 models for this year.
How do you remove ignition cylinder from 1988 Chevy pickup?
Remove the steering wheel. (you will need a steering wheel puller) Remove the turn signal switch. It is not necessary to completely remove the switch from the column. Pull the switch rearward far enough to slip it over the end of the shaft, but do not pull the harness out of the column. Turn the lock to Run. If necessary, remove the ignition key. If equipped, remove the buzzer switch assembly. Remove the lock retaining screw and remove the lock cylinder.
How do you replace the starter on a 1974 Chevrolet Classic?
...everyone should have a manual for their vehicle, and the local library should have a professional shop manual available, to make copies of, in the Reference section...good luck:)
What is the gross vehicle weight of the 2012 Chevrolet Tahoe-Hybrid?
The gross weight of the 2012 Chevrolet Tahoe-Hybrid is 7100 lbs..
What causes the automatic transmission to shift hard from first to second gear?
More likely it has something to do with pressure problems in your transmission, check the fluid and replace the transmission filter. If the problem is not fixed check the vaccum lines running to the transmission and the vaccum off the engine.
What is the payload capacity of a 1995 Chevy 1500?
Open the driver side door and look for the gvwr on the white sticker. That number is the maximum weight you can haul. The maximum weight the rear axle can handle is the gross axle weight rating (gawr) which is also located on this sticker.
What is the difference in automobile backfires?
you did't specify if it is carburetor or fuel injection.if the backfire is out the exhaust or through the intake. if out the exaust it is usually ignition and if it is through the intake/carb or the plenum/fuel injected it usually is a lean or fuel starvation...
The '99 Monte Carlo doesn't have a reverse signal input. I'm guessing you're referring to the stock radio. The most the radio has is an auxillary output for the optional 10 or 12 disc CD changer.
How do you hook up a starter button in a 1980 Datsun 210?
I'm somewhat confused by your use of the term "starter button". I assume you're referring to hooking up a remote starter allowing you to spin the engine while you're working under the hood. First make sure that the vehicle is in either park or neutral. Second, make sure that the ignition switch is in the "off" position. Locate the starter solenoid which is atop the starter assembly. Disconnect the trigger wire at it's spade terminal. The wire will most likely be yellow in color. Connect one end of your remote starter button at this terminal on the starter and the other end to the positive battery post.
ABS light comes on and at the same time you have no power to windows wipers heater blower?
try new ignition switch but not the key part of the switch the electronic part of the switch...when everything stops try turning the key towards the start position but don't turn to far as not to grind the starter while running...if everything comes back on it's for sure.but sometimes even turning the key will not work. remember the electric part of the switch only...
It depends on what model it it if its extended cab or regular cab if it has a long bed or short bed
Where is 57 chev running on empty?
A panel beater in Kingsford, Sydney bought it. It did the Summer Nats a few times. Cant remember his name but we called him Klinger cause he had a big nose..lol
How do you bleed rack and pinion power steering 92 Bonneville se?
Fill power steering resevoir Leave cap loose Turn wheel "lock to lock" 5-6 times
