0
Oldsmobile Cutlass Supreme
Manufactured by General Motors from 1966 to 1997, the Oldsmobile Cutlass Supreme was a mid-size car produced in five generations. Its fifth generation model was available in three body styles: 2-door convertible, 2-door coupe and 4-door sedan.
2,211 Questions
How old is a model 311 20 gauge and what is the value?
on the side of it does it say Mod. 311 H? Is it double barrel? Because I have a savage 20 gauge 311H. Im 12 years old and its my first gun i want to know how much it is worth also. Contact me at Mike92ak47@aol.com Michael Link
Bulbs?
Sockets?
Steering column switch?
How do you set the timing chain on an Oldsmobile Cutlass?
I looked in the book and you should have a timing chain.
The oil pressure will depend on the condition of the engine. If you have 10 lbs at idle when engine is hot with this mileage, you are within specs. I would use 10W-30 oil. oil pressure of 10lbs and up is acceptable at hot idle. i like to use havoline 30wt oil. have never had a problem with it.
If the rotors on your '02 Liberty are very difficult to remove should the axel bolt come off also?
I don't know specifically about your Liberty, but rotors are often hard to remove and usually have several useless-looking threaded holes drilled in them on the outer face near the hub. The purpose of the holes is that you can thread properly sized bolts into them and then turn the bolts to "pop off" the rotor. So you might look for those.
How to replace a heater blower motor on a 1997 Oldsmobile cutlass?
THE FIRST THING THAT YOU WANT TO DO IS TO TAKE OFF the negative battery cable, then you have to take out the floor console and shifter handl. Then you have to remove the panels under the glove box on the passenger side over to the driverside and then on the passenger side right next to the right inside panel right under the glove box next to the fire wall you can see the blower motor there are three 7mm screws to take out and then just unplug it and take it out replacement is just the opposite.
How can you determine the engine type from the VIN?
what the numbers on the engine mean,I have no idea. I have checked different sites but to no avail.
What i suggest you do,is to copy down both the VIN and engine number,contact the manufacterer,In my case it was Suzuki Canada,and they did the research for me. Every manufacturer records the numbers when the vehicle is built and archives this information.In my case I found out that even though the engine and frame numbers were different,they were the right numbers and the frame and engine match together.
I hope this helps and good luck.
How do you remove Door panels in a 86 cutlass?
First the clips on each side at the bottom has to be disengaged. Then push the top part into the door and lift the panel up, it should come off.
How do you change a brake light switch for a 1990 Toyota Camry?
To change the brake light switch, I would go purchase one at the parts store first so that you know what you are looking for. Then lool behind the dash and follow the brake pedal up, unhook the spring, then keep going up and you will see the switch - unplug it, then loosen the nut that is on the switch side of the screw. There is a nut on the other side that is welded into the brake, don't mess with this one. After you loosen the nut, unscrew and reverse the process to put the switch back in... make sure you screw it in the right distance so that even a little brake sets off the lights... Good luck
Additional information that you will find helpful: It is difficult to find this switch because of the location. You have to lay your head down in the footwell as far to the left of the brake as you can, and with your back partially inside the door and with your feet on the ground. This is the only way you will be able to see the switch, because the body of the bracket is in the way from any other angle. You will need to take a small flashlight and place it on top of the fuse box and wires to the right side of your head. Aim it upward so you can see the switch. I also found it helpful to remove the cover from the brake light in the back window and turn the light toward the front so you can see it without having to maneuver in and out of the footwell area.
When following the brake pedal arm up you will see the cotter pin and the round pin that keeps the brake pedal arm in place. You will have to remove the pin to release the brake pedal arm. Once the brake pedal arm is released and hangs free, you will see a small, round, black button part of the switch. You may see 1 to 2 threads coming through the welded square nut. On the back side of the assembly, you will see the remaining threads and the body of the switch.
You will only be able to reach the switch with your left hand while in the awkward position you will be in. You will need a #14 open-end metric wrench to loosen the nut which secures the switch in place. You will also need to bring as much patience as you can muster up, and take frequent breaks while doing the work. I am not left handed, but I relied very heavily on my left hand to do all the work, including removing the plug from the switch, reinstalling the plug into the new switch, loosening the nut, removing the switch, and installing the new switch. I couldn't do anything with my right hand because I couldn't get it into the cramped space.
It is a difficult job, but once you see for yourself what I describe above, you can get it done!
Where is the fuse box on a 94 oldsmoble cutlass supreme?
Open the glove box, which should be opened by turning the round lock. Then, take everything out of the glove box. Now, pull the "Box" itself out. The fuses are located here.
ANSWER
On my 95 cutlass supreme, the fuse box is on the side of the dash, right inside the passenger side door. You have to remove a panel that says "fuses" on it.
On a 1996 Oldsmobile Cutlass Supreme does the temp sensor control the radiator fan?
no it does not! left side on front of engine are two relay fuses 1 for each fan.
What would cause a 1996 Tahoe to not want to start why cranking longer than normal then start?
Possibly fuel pump getting weak.......fuel pressure regulator may be going bad..........fuel filter dirty......... those could be some........I would change out a fuel filter first, cheap and never hurts......... then try this.............turn the key to on.........and wait a few seconds, and then crank............if the engines fires right up...you are looking at a fuel pressure issue. Those are my suggestions to start. I had this problem with my 1996 Tahoe also....it turned out to be the fuel pressure regulator ...you must remove the intake manifold to get to the regulator....parts cost was $89.73 for the regulator and $30.30 for the intake gasket ...labor at a good shop was $206.06.....
How do you replace a axle on a 95 olds cutlass supreme?
How do you replace a axle on a 95 holds cutlass supreme
Where is the flasher module located on a 1994 Olds Cutlass Supreme?
FLASHER MODULE??????????????????????
Where is the fuse box location on a 1997 Chevy s-10 TRUCK?
The fuse box should be located on the drivers side of the dash between the drivers door and dash.
By changing the water pump, you may have allowed air to enter the engines water passages. In order to get rid of it you must allow the engine to burp out the air by adding in coolant while engine is running. Make sure you do this method when the car is cold. In the mean time your temp gage might read hot until the air escapes the engine. If it does not read hot any more then your problem is cured. Good luck.
Where is the oil pump on 1988 cutlass located?
On a 1988 Cutlass, the oil pump is typically located inside the oil pan, which is at the bottom of the engine. It is driven by the crankshaft through a long shaft. To access the oil pump, you usually need to remove the oil pan, which may involve taking off other components for clearance.
