0
Peugeot 306
The 306 was a front-engine, front-wheel drive compact family vehicle manufactured by the French automaker Peugeot from 1993 to 2002. The vehicle was released in three- or five-door hatchback, four-door saloon, five-door estate and two-door cabriolet body styles.
620 Questions
How do you take the odd shaped radio out of a peugeot 306?
Well actually it is just a normal radio with a funky shaped frame. Go to Halfords and ask for removal pins and the back of the pack will show you how to remove them. The pins are like �5
or to make it cheaper just do it the old fashioned way as your probably going to replace the radio/cd cage anyways just use small n pointy household items lol job done. the years stealing them showed me to improvise haha jk
What is the greatest common factor of 21 and 9?
3
To find the GCF of two or more numbers you can find the factor pairs of each number and then find the factors they have in common.
9:
1 x 9
3 x 3
21:
1 x 21
3 x 7
The GCF of 9 and 21 is 3.
What happen in the year 607 before common era?
Death of Zhou Kuang Wang, King of the Zhou Dynasty of China occurred in 607 BC.
Will a Peugeot 306 diesel starting motor fit a peugeot 406 diesel?
If the engine is of the same type it will. ie an XUD engine (1905cc) from one peugeot or citroen will fit another xud type but I do not know if it would fit on a HDi engine. On the 1.9 XUD the starter is the same on turbo and nonturbo models.
How do you reset the anti start code at a Peugeot 306 1995 1600 cc?
Normally you don't need a code, especially if it's just had a minor knock, which normally sets this off. Usually you can disconnect battery for a couple of hours, which should be enough time to de-energise the coil, which is stopping the fuel getting to the engine.
What tire pressure peugeot 306?
Depends on model of car, speed/loading, tyre make, and size.
Try 2.4bar front and back (35psi).
This information is in the Drivers Handbook or on a Garage forecourt (not petrol station!).
There is usually a label attached inside one of the car door frames, with just this information on it.
Where is the Starter motor Peugeot 306?
Which model is it, year etc. on a 95 pug 306 XL 1.4 its quite difficult to get at ( im trying to change mine now) if you look at the rocker cover (top of the engine) its towards the cockpit at the back of the engine on the right. an easier way to find it is to follow the leads off of the battery one should go behind the engine and to the starter
What do warning lights on Peugeot 306 dashboard mean?
it means you have problems
obviously
if its a orange light with the picture of a engine it could mean you have problems with the fuel injection system or the car electrics.
If you check the car manual it will be in that.
How to Tighten handbrake Peugeot 306?
this is for a peugeot 306 made in 1999 (phase 3):
to do this you need to remove the long plastic bit that surrounds the handbrake and the gear stick. When you've done this you'll be able to get access to the adjuster nut on the bracket with the handbrake cable riunning through round the back of the handbrake.
1) remove the rear ashtray.
2) remove the two screws (which have torx screw heads) that can be seen in where the ashtray came out from. (they're holding some of the plastic bit down.
3) remove the gearstick gaitor. do this by using a spade head screwdiver or an old credit card to lever the gaitor upwards, working around the edges.
4 )remove the 2 nuts that hold the platic bit down that are under where the gaitor was(1omm nuts)
5)the long plastic bit can now be removed. pull it upwards to let it over the two bolts at the gearstick, and backwards to remove it off the plastic tabs at the front.
Adjusting the adjuster nut (13mm):
it's probably easiest to get to this sat in the back of the car.
1) locate the adjuster nut at the back of the handbrake under the grey foam stuff.
2) take off the handbrake. (Make sure your car isn't going to role anywhere/ chock your wheels/get someone to step on the foot brake.
3)turn the nut clockwise to tighten the handbrake. You want to get the handbrake to be fully on at somewhere between 6 to ten clicks when you pull it up.
1) put it all back to together.
Can you fit phase 2 headlights on a phase 1 peugeot 306?
from what i understand you cannot as the phase 2 headlight is 1 unit and the phase 1 headlight is in 2 parts and im not to sure but i think its also a different shape.
Where is the AC control relay location on 1997 peugeot 306?
The 1997 Prot?g? air conditioning control relay switch will be located in the fuse box. The fuse box will be located beneath the drivers side dashboard.
How do you change bulbs behind heater dials on 306?
pull the front facia off the heater dials then you find a white box which is to operate the heater dials remove the front from there which is clipped on then there are your bulbs
When the head gasket goes on a 1.4 306 do you need to have the head skimmed?
Not necessarily. Look at the codition of the head. Get hold of a metre long (3 foot/yard steel or aluminum rule) and put it across the head in different directions, logways, across, diagonal. This to check that the head hasn't warped. If it seems ok fit a new head gasket.
AnswerThe above is good advice, your head is only likely to have warped if it overheated badly when the gasket blew... my 306 has now done 10,000 miles on its new head gasket and I didnt skim the head since it seemed ok...For the sake of an extra £40 id get it skimmed anyway!
Our cambelt tensioner went last June so everything was replaced inc the head gasket...we didnt skim the head as it hadnt over heated but now 1 year on the head gasket has gone, this time ill be getting it skimmed. Its £40 and i wish id done it last time round as we`ve since been told that the head should be skimmed every time its taken off.
Ours is a 1996 p reg 306 1.4....its done 20,000 since the head gasket was done but still shouldn't have gone yet!
We are now looking at £70 for parts (inc spark plugs, head bolds, air filter etc) £40 for the head skimming and what we are paying to a mechanic to fix it....luckily its a friend doing it so this isn't much but it could have all been avoided by spending £40 last time!!
Ann
Can you shorten the drive shaft to fit a longer shaft on the transmition?
this requires a drive shaft company that can cut and weld it and balance it after.
Where can you find a diagram for the alternator-aircon belt on a Peugeot 306?
IN the Haines manual for that car.
How to unlock peugeot car radio with error 4 showing?
press and hold the "band" button for at least 5 sec, then after 15 sec the display will show "- - - - " so that you can enter the right code.
Cheers.
aldo
How do you change the ignition coils on a Peugeot 406?
How do you change the ignition coil on a peugeot 406 coupe?
How do you remove the passenger airbag on a pug 306?
It's not advisable to mess around with an airbag as it contains a BOMB like explosion to deply the airbag. It should be held in by a few screws Be warned dont face directly at it incase of deploy
