0
Daewoo Leganza
The Daewoo Leganza was a mid-size sedan manufactured by the South Korea-based automaker Daewoo Motors from 1997 to 2002. Powered by a 2.0 liter 4-cylinder engine, this vehicle was marketed as an inexpensive luxury car in some markets.
344 Questions
How do you fix an antifreeze leak on a 2000 Leganza Daewoo?
Depends on where in the cooling system the leak is. Some choices are:
-Busted hose Find and replace house -Bad radiator Replace radiator -Leaking thermostat housing Replace thermostat housing and gasket -Failing water pump Replace water pump. While doing this, replace timing belt, tensioner, and idlers, as this is quick task, replace it all while you are in there.
Where is the crank shaft position sensor on a Daewoo Leganza?
On the Daewoo Leganza it is located behind the AC compressor.
Why did your Engine stall while driving also rotten egg smell 1999 daewoo leganza?
sounds like a bad catalytic convertor
How do you unlock the code on the CD player on a Daewoo Leganza?
Pull the radio out. On top of the radio there is a 4 digit number that's how you unlock it.. My car is a 2001 Leganza daewoo and the number is 4316.
Where can you find the AC relay on a '92 Chevy pick-up 1500 4.3 engine?
the relay should be under the hood on the top of the firewall or next to the main fuse box on the wheel well
How do you change rear brake pads on Daewoo Leganza?
Lift the vehicle on a car jack, remove the tire, remove the brake shoe/calipers, and remove the old brake pads. Put in the new brake pads, replace the brake shoe/calipers, replace the calipers, and lower the car.
How do you Change the Timing Belt for a 1999 Daewoo Leganza?
The 1999 Daewoo Leganza has two engines: the 2.0L and the 2.2L. The procedure for changing the belt is the same for both engines. The manufacturer recommends changing the timing belt every 72,000 miles, as both engines are interference engines. If the belt stretches so far that the tensioner cannot take up the slack, or if the belt breaks, the valves will most likely hit the pistons, causing extensive engine damage. No special tools are needed to change the timing belt.
1.
Step 1
Disconnect the negative battery cable using the appropriate wrench. Lay the cable aside, making sure you don't let it touch metal. Raise the front of the Leganza with the floor jack, then support it with jack stands. Remove the floor jack.
2.
Step 2
Disconnect the intake air temperature sensor by unplugging the wiring harness. The intake air temperature sensor is on the air intake near the air filter. Disconnect the breather hose and the air intake (air filter hose). Remove the air cleaner housing and air cleaner. Use the set of sockets and wrenches to remove all items.
3.
Step 3
Remove the right front wheel using the lug wrench. Remove the right front fender inner splashguard. Remove tension from the accessory belt tensioner using a wrench, then remove the accessory drive belt. Remove the crankshaft pulley bolts using the appropriate size sockets, then pull the pulley off.
4.
Step 4
Place the 2-by-4-inch board on the floor jack. Slide the jack under the oil pan and jack it up enough to touch the oil pan or the bellhousing on the transmission, to support the engine. Remove the right engine mount bracket. Remove the power steering hose bracket and the bolt using the appropriate size socket. Remove the timing belt cover using the appropriate socket.
5.
Step 5
Turn the crankshaft counterclockwise using the appropriate socket. Do so until the crankshaft timing mark lines up with the notch at the 6 o'clock position, and the dots on both camshaft sprockets line up with the timing marks at the 12 o'clock position on the head. Each camshaft sprocket has two marks. The sprockets are interchangeable. When facing the engine, the left camshaft sprocket needs to match the "Intake" mark, and the right camshaft sprocket needs to match the "Exhaust" mark.
6.
Step 6
Loosen the timing belt tensioner bolt. Turn the tensioner away from the belt (clockwise), then tighten the bolt to hold the tensioner out of the way. Remove the timing belt.
7.
Step 7
Check that the timing marks are still perfectly aligned. Install the timing belt starting at the crankshaft pulley. Work your way counterclockwise around the top of the tensioner, the outside edge of the water pump, the inside edge of the idler, the outside of both camshafts and the inside of the right idler, keeping the belt tight on the nontensioned side.
8.
Step 8
Loosen the tensioner pulley bolt. Turn the tensioner counterclockwise using a wrench until the pointer on the tensioner is aligned with the notch on the block. Tighten the tensioner bolt to 18 foot-pounds of torque.
9.
Step 9
Turn the crankshaft counterclockwise (slowly) for two turns until the timing marks are lined up again, as shown in Step 5. Check the tensioner pointer to see that it is still aligned. If not, repeat steps 8 and 9.
10.
Step 10
Install the rest of the parts in reverse order of removal. Tighten the crankshaft pulley bolts to 15 foot-pounds of torque.
Where is the fuel inertia switch located on a 2001 daewoo laganza?
On the right next to the passenger seat, towards the back adjacent to the threshold kick panel.
Where is the crank sensor located on a 2001 Daewoo Leganza?
Located behind the A/C Compressor. You will need to remove the P/S Pump, A/C Compressor then the bracket that holds them both.
Is there an easy fix in replacing a head gasket for a 99 Daewoo Leganza?
I had an external antifreeze leak, and I tried a product called steelseal and it worked as advertised, just took off radiator hose and added the product as per instructions still no leak, i think it messed with my thermostat though.
i have just replaced a flasher on a 2001 leganza and it is on the driverside under the dash and is green.
Me, too, though mine is a 1998 Right hand drive. It was behind the bonnet lever. Once removed, recognize it as three spades with 31, 49, 49a marked on an original (though not on my replacement).
What is the radio code for a Daewoo Lanos?
The radio code feature of Daewoo models (sold in the US from 1998 - 2001 as Leganza, Nubira, and Lanos) is meant to be an anti-theft security feature, but unfortunately it can also present a problem to legimate owners when their car batteries have died or been replaced. When the radio is removed from the power source (or the power source is interrupted), the radio will reset itself (prevent any use) and flash "CODE" until the proper code is entered. Each radio has a specific four-digit code, which was originally provided on a plastic card within the owner's manual kit. New owners were encouraged to remove the card and keep in a safe place outside the car (eg home). Since these cards may be lost over time (or perhaps not passed along when the car was sold used), that leaves today's owner in a tough spot. To obtain your code... You can try calling Daewoo Motor America (the company still operates a HQ in CA for service/parts/warranty purposes); their website is still www.daewoous.com. You can also try calling your original Daewoo dealer, who hopefully still has some technical materials and personnel to help you identify your unique code. Some General Motors dealers may be able to help, as GM acquired Daewoo and still sells Daewoo-made cars in the US under their Pontiac and Chevy brands. But all methods above may be difficult for an individual detailed problem such as obtaining your unique radio code. If all else fails, TRY THE CODES BELOW, which were the most common codes used in models during the 1998-2001 model years. 4316
2152
4513
4362
1156
2145
3451
6361
5624
5241
3346
1165
3241
4524
5436 I am posting these because - although the code feature was a valuable anti-theft feature - there have been no models sold in the US since late 2001, and the radios are now undoubtly worthless to theives. At this point, the radio code feature can only be a major nusance to an owner of a still-running used Daewoo. Good luck and enjoy your car!
How do you set timing marks on a Daewoo laganza?
Did one last weekend. Both cams have a line the lines up with marks on the valve cover. Basicly the marks on the cams both are set to point to twelve o'clock. The mark on the crank shaft pully points to 6 o'clock or strait down. Hope this helps. If you are not in a hurry I could draw you a picture or send a photo if you are more patient. I have to tear into it again to replace a cam shaft sensor. Good luck. Be careful, if you get off you'll smash up the valves as the Leganza is an interferance engine.
Where is the oil pump located on a 2000 Daewoo Leganza and how do you replace one?
The oil pump is in the oil pan at the bottom left 'front' of the engine. (Note: The 'front' of the engine is on the passenger side. ) To replace it you will need to remove the catalytic converter, some exhaust piping, the oil pan, the valve cover, the timing chain and timing chain cover. It is bolted to the engine block just above the crankshaft gear.
What is the cost of repair timing belt replacement 2000 Daewoo Leganza?
depends on whether or not the belt has snapped,if not £250.00 should cover it,if it has then it depends on the amount of engine damage caused.
Is a 1999 Daewoo leganza a zero clearance engine?
YES THE VALVES WILL HIT THE PISTONS IF TIMING BELT JUMPS OR BRAKES YES THE VALVES WILL HIT THE PISTONS IF TIMING BELT JUMPS OR BRAKES
What is the 2001 Daewoo Leganza gear order?
I have the 2000 model are you talking about rev/neu/ drive/ park gears?
What is detonation in an engine?
this was the first answer on google... do some research. Link is on the related links box below.
2002 Daewoo leganza coolant drain plug location?
where is the draincap on the radiator on the deawoo leganza 2000
How do you remove the rear seat in a Daewoo lanos?
There is a bolt at the rearof the lower seat (in the centre) that holdsit in. Its normally hidden by the boot carpet and you may need to fold the seat tops down slightly to get to it too.
Check under the dash along the back side of the brake pedal arm, the brake light switch is mounted there. Some tomes it comes loose from the mounting and the adjustment is off and the arm does not make contact with the switch. This happened to mine.
