0
Pontiac Bonneville
The Pontiac Bonneville is a full-size/mid-size car manufactured by General Motors between 1957 and 2005. The ninth generation model was available as a 4-door sedan and featured the StabiliTrak stability control system.
1,348 Questions
Your right turn signal doesnt work everything else does?
usually this is a bulb burned out on the left side
Where is the horn located on a 1993 Pontiac Bonneville and how do you change it?
it is located behind the battery on the pass side fender. i belive its held in by 2 bolts. and 1 harness to unclip.
How do you replace the side view mirror on a 1998 Pontiac Bonneville?
You have to take the door panel off on the inside of the door, and there are two bolts that hold the mirror housing. Its a real pain in the neck. If your just trying to take the mirror out of the housing and replace it, sorry I can't help you there.
Where are the fuses on a 1991 Bonneville?
There are three fuse boxes on sse models. One under the panel just below the instrument cluster (next to the steering column), one next to the glove compartment (acess by removing the glove compartment), and one under the hood on the firewall. I believe the standard and le models were similar.
the head lights you just pop the hood open and remove light from socket and plug in new bulb without touching glass of bulb with your hands and put back in * ( i have small hands and it was hard for me), the fog lamps you have to do from underneath by removing a few body clips and then you gain acess to them.
if you are referring to the whole headlamp assembly because they are fogged over really bad as mine are do a Google for headlamp assembly i found the for 135 bucks a side for the headlamp assembly and like 40 for the fog.
hope this helped
What is the code P0128 on your 2001 Pontiac Bonneville?
Trouble code P0128 means:Coolant thermostat (coolant temp below thermostat regulating temp)
Why would a 93 Bonneville dash stop working?
If you mean the lights, it's probably just the headlight switch itself, which can be rotated to adjust the brightness of the dash lights.
Turn it back and forth to see if the dash lights wake up.
If you mean the dash electronics altogether, that'd be wiring.. probably a ground - get a schematic and get to it.
check ur fusebox..fuse might be blown
Is it possible to read engine codes in a 95 Bonneville with no scan tool?
Uh, not necessarily......
My 1995 SSE is a transition car. The government wasn't sure what OBD2 would be, so they pre-released OBD2 to see how the car builders would react. GM reacted by hastily building cars with this version of OBD2. Shortly thereafter, the government released the ACTUAL OBD2 standard. They may CALL your car OBD2, but it may be a TRANSISION OBD2.
The result? If you have an OBD1 car, you can get the error codes from the check engine light.
If you have an OBD2 car, you must use a scan tool to retrieve and reset the codes. BUT, if you have a transition car like mine, you are neither OBD1 NOR OBD2. You have one of the infamous transition cars. They have an OBD2 plug (computer) connector, but an OBD2 scan tool will not read them! What you must make sure of when you buy a scan tool is that it will read transition cars. Some of these tools require a special adapter or cable to read transition cars.
I hope you are not one of the transition people. If you're not, then your 95 is an OBD2 and any OBD2 reader will get the job done.
Good luck.
What if your hood is jammed on your Bonneville and you cant get it open?
push a wire coat hanger or welding rod ( shaped obviously) under the grill locate the release bracket and pull like hell! otherwise use a hammer and cold chisel and get a new bonnet (as we call them in England )
How do you remove the power steering pulley from a 1996 Pontiac Bonneville?
There is a specific tool for this operation. It is a power steering pump pulley puller. This grabs the groove in the end of the pulley and pushes the punp shaft away from the pulley. Available at your parts store.
How do you change a serpentine belt on a 95 park ave Do you need to remove the upper engine mount?
I have a '96 Ultra and I've changed both belts. I had to remove the bottom screw of the upper engine mount to change both the Supercharger and Accessory belts. Take the right front tire off for easier access. Remove the bolt, then get a star socket and remove the screw. There is a metal piece held in by the screw. With the screw missing you can now pull the belts through. You'll have to route the belts in front of the pulley that is behind the mount.
I am a Do-It-Yourselfer. I've done this twice. And that's how I did it.
Also, make sure you don't waste your money on cheap belts. Pay a little extra for good belts so you won't have to do this much.
Is there a way to replace the LCD in a 97 amfm CD radio?
a very regular problem about this is no the lcd, the problem is the led that is back the lcd, just replace it.if the numbers you can see them just in the night im sure is just the led.
Where is the fuse for the interior lights in in 2000 Dodge Caravan?
If I remember correctly the fuse box is located under the hood on the drive side of the engine. You have to remove the cover to exspose the fuses... the inside of the cover should identify the appropriate fuse.
AnswerIf I remember correctly the fuse box is located under the hood on the drive side of the engine. You have to remove the cover to exspose the fuses... the inside of the cover should identify the appropriate fuse.Answer: Intermittent problems are very hard to diagnose. Your no start problem may be your fuel pump. Try to check it for pressure during the not start problem. Also, check for spark at the spark plugs. From what you described, your problem could be the coil module, the cam angle sensor or the crank angle sensor.
Will 6X Pontiac heads that came out on 400 and 455 engines fit a 350 Pontiac engine?
Yes, all tradional Pontiac V8 (287,317,326,347,350,370,389,400,421,428,455) heads will physically bolt to all blocks. The later 265/301 will bolt to older blocks also but the water passages between the head and block are different and there is no available intake manifold. 6X heads came on Pontiac 350-400 from 1975-1979. no 455s were factory equiped with 6X heads. There are two versions of the 6X, one stamped "4" and one stamped "8" the heads stamped 4 have smaller combustion chambers around 94 cc, the one stamped 8 are about 100-101cc. The 6X-8 head would give very low compression (about 7-1) the 6X-4 would be better but is still only about 7.6-1. High valve lifts can cause valve to cylinder wall interference on 350s since the bore is only 3.88".
Why won't your 1993 Pontiac Bonneville sse not start you have replaced the starter?
No try the starter relays first you will find them in the front driver side
Why After replaceing front wheel bearing assy ABS light is on?
ABS sensors are often a ring of metal teeth pressed onto the axle or hub. If any of those metal teeth were damaged when replacing the bearing it may trigger the ABS light.
How hard is it to replace the fuel gauge sending unit on a Pontiac Bonneville?
Should'nt be that tough. You have an access cover in the trunk under the carpet on the right side. Pull out the fuel pump and the fuel guage sending unit is part of the assembly.
