It is where a military force bombs a place with artillery and other weapons.
Detail Installation Instructions qx4 Antenna?
rip out old antenna, feed in new antenna while someone turns on the radio. the motor will spin until it catches and rolls up the new antenna tail. it seats itself
How can you get the hippie look?
Always be calm, wear a lot of tie dye and loose clothes, buy peace jewelry with doves and peace signs.
For a more modern take on the hippie look- maxi dress (floral), long loose wavy hair, leather sandals-- everything= very flowy
The word characterization is wrong in the sentence. The correct word should be character.
When did the art of topsy turvy designs originate?
It is believed that the art of Topsy Turvy designs began around the time of the Civil War. They were made by local crafters who shared patterns.
SCADA stands for Supervisory Control And Data Acquisition. It generally refers to an industrial control system: a computer system monitoring and controlling a process,A Human-Machine Interface or HMI is the apparatus which presents process data to a human operator, and through this, the human operator, monitors and controls the process.
What exactly do footsoldiers do?
Foot soldiers are the ancient British soldiers that marched in a straight line on the beat of a drum. After the first line was down (dead) the next line would step up and so on and so on. This responce is a seventh grade level responce on what we learned about in social studies on the Boston tea party and the Boston massacre which really wasn't a massacre at all.
By Tayleor
Whats the difference between vertical and horizontal writing?
vertical is top to bottom(parallel to Y axis). horizontal is left to right(parallel to X axis).
I might be wrong but I think it means a phase of dissiness, and vertigo stick means when there is like a stick that you spin on and stuff and it makes you dizzy, something you do in a relationship.
What is confrontational politics?
Read
http://groups.yahoo.com/group/Maryland_Alert/files/ChristianPoliticalActivism.pdf
for an introduction and outline.
How do you write a sentence using the word assent?
Assent means to agree to something after careful consideration...so After yesterday's deliberations on the issue of gun control, i now assent to vote yes for House Bill 113.
What is a sentence for appalled?
The horror movie appalled me.
I was appalled (shocked or horrified) when my sister drew on my book report with a permanent marker.
I was appalled by the scene of the train wreck.
This question does not make sense, but if I had to wager a guess I'd say the person asking either wanted a list of the negative aspects of socialism or wanted to know why people oppose the idea of a social system designed to allow, at the very least, comfort and equality to all. I am not qualified to answer either of these questions definitively, but the first thing that comes to mind is the notion of motivation. As in, why would people be motivated to exel in their fields if they were not able to reap the rewards? People are selfish by nature, and if they didn't see what they were doing as benefitting themselves, why would they do it with any level of enthusiasm? Not that I dislike the idea, but it does not seem realistic to expect such a system to succeed.
What are the areas could use improving at work?
what are the work related areas that needs improving in the restaurant?
Would a bullet ricochet on a steel target?
Yes, provided the target is not thin enough to be penetrated. You should shoot at paper targets in a designated shooting range.
I was just wondering about this myself the other day, howstuffworks.com provides many useful explanations of how commonplace items and many other things work. See the link at the left.
the hair dryer dries your hair by speeding up the evaporation of water from the hair's surface. the hot air emitted from a hair dryer increases the temperature of the air surrounding each strand of hair .since warm air can contain more moisture than air at room temperature ,more water can move from your hair into the air. the incease in temperature also makes it easier for the individual molecules in a water droplet to overcome their attraction to one another and move from a liquid to a gas state.
There are two basic things to a hairdryer. They are heat and air. How the hairdryer works is the two things, heat and air are pushed together and the hot air is pushed through the funnel and out in one direction. The heat is made from something inside the hairdryer that heats up very quickly. First the hairdryer will get too hot to touch. The second part is when the fan pushes the air out of the hairdryer by a very simple motor that rotates the fan to push out the air and then you can dry your hair. Most hairdryers also allow you to turn off the heat and turn on cold air if you want. A lot of the hairdryers today will allow you to change the heat and how fast the air comes out. The hotter the hairdryer gets the hotter the air will be. A heating coil makes the heat. When the dryer is connected to the mains the coiled wires will warm up. The coil is made up of a number of two different metals these are, nickel and chromium like on toaster oven. Nichrome wire is a poor maker of electricity and so it is very heat resistant so that is why the hairdryer allows it to get very hot. The nichrome wire does not rust, which allows the hairdryer to function right and for a longer time. Nichrome wire is just a coiled wire that's wrapped around insulating mica boards. When the air is pushed through the main body of the hairdryer. It is cold before it reaches the element, depending on how long the air takes to pass through the dryer. This will choose how hot the air will be when it leaves through the other end. The switch for the temperature will speed up the fan or slow it down which allows the temperature to be set correctly. The hairdryer dries your hair by speeding up the evaporation of water, and increases the temperature of the air. When you plug in the hairdryer and turn it on currents go through the hairdryer. The circuit first supplies power to the heating element, like tourmaline-infused ceramic coating. The current that went through the hairdryer when you turn it on is what makes the little fan inside turn. The air made by the fan is blown down the barrel of the hairdryer. As the air goes through the coiled wire or the tourmaline-infused ceramic coating, the heat warms the air by forced convection. Then the hot air steams out of the end of the funnel. The fan in the hairdryer looks like a hydraulic turbine aka a water wheel. It isn't like a water wheel though because water wheels make the potential energy of flowing water to generate power. The fan in a hairdryer uses electrical energy to generate power. The small motor actually sits inside the fan, which is firmly attached to the top of the motor. When you turn the hairdryer on it gives power to the motor so the motor and the fan that's attached both spin. The movement of the fan blades takes air in through the small round air inlets on the side of the hair dryer. These holes are covered by a safety screen. The safety screen prevents other objects from being sucked in as well. When you want to change the speed of the airflow it involves changing the speed at which the motor is turning. This is done very easily by changing the current going through the part of the circuit giving the motor power. When the power is low, the motor and the fan spin slowly. Less air is pushed through the hair dryer. When there's more power, the motor speeds up. The fan rotates very fast, taking in more air and making the airflow bigger. There is a heat shield on the barrel of the hairdryer that keeps the barrel safe from getting too hot. To make sure that the air coming out of the barrel never gets near 140 degrees, hair dryers have some type of heat sensor that trips the circuit and shuts off the motor when the temperature gets too high. The switch is a simple bimetallic strip.
The bimetallic strip is made out of sheets of two metals, both expand when heated but at different rates. When the temperature rises inside the hairdryer, the strip heats up and bends because one metal sheet has grown larger than the other. When it reaches a certain point, it trips a switch that cuts off power to the hairdryer. For more protections for overheating and catching fire, there is often a thermal fuse included in the heating element circuit. This fuse will blow and break the circuit if the temperature and current are excessively high. Without the proper insulation, the outside of the hairdryer would become extremely hot to the touch. If you grabbed it by the barrel after using it, it might seriously burn your hand. To prevent this, hairdryers have a heat shield of insulation material that lines the plastic barrel. When air is drawn into the hairdryer as the fan blades turn, other things outside the hairdryer are also pulled toward the air intake. This is why you will find a wire screen covering the air holes on either side of the dryer. After you have used a hairdryer for a while, you will find a large amount of lint building up on the outside of the screen. If this were to build up inside the hairdryer, it would be scorched by the heating element or might even clog the motor itself. Even with this screen in place, you'll need to periodically pick lint off the screen. Too much lint can block the airflow into the dryer, and the hairdryer will overheat with less air carrying away the heat generated by the nichrome coil or other type of heating element. In the end of the hairdryer where the barrel is, is covered by a grill made out of material that can withstand the heat coming from the dryer.
I hope this helps?
:)
it is a philosophy based on Confucius, a great Chinese thinker and philosopher. for more information, check out: http://en.wikipedia.org/wiki/Confucius
What month did the great plague start?
The great plague started in Spring, but it wasn't really taken notice of till summer July/August time.
Is momentum hamiltonian operator is hermitian operator?
The hamiltonian operator is the observable corresponding to the total energy of the system. As with all observables it is given by a hermitian or self adjoint operator. This is true whether the hamiltonian is limited to momentum or contains potential.