0
Air Filters and Intake Manifolds
Air filters are devices that remove solid particles such as dust, mold, and bacteria from the air. Used in building ventilation systems and engines, they contain an intake manifold that is primarily tasked to optimize the system/engine’s performance and efficiency.
2,054 Questions
Torque specs on alluminum p51 intake mounting bolts?
Fox Lake Racing P-51 Intake Manifold mounting bolt torque spec. is ( 18 lb-ft ) 25 Nm
How do you replace the intake manifold gasket on a 2000 ford explorer?
"Leave it to the pros" was the answer I got when calling my associates about this very same issue. Replacing the intake manifold gasket requires several tools including a torque wrench and lots of disassembly. You need to take apart parts around it as well as the part itself. If you know little about cars as I do, expect it to take a weekend to get this done once you have the proper instructions. Save yourself the time and pain. It ain't like changing your oil.
The vehicle maintenance schedules will dictate how long a given air filter is supposed to be changed. For instance most of the Chevrolet engines require the change pf the engine air filter after every 45000 miles.
How do you replace the air filter in the 2005 suzuki aerio?
It is pretty easy to replace the air filter in a 2005 Suzuki Aerio. Remove and open the air intake manifold, remove the old air filter, put in the new filter and reattach the air intake manifold.
What are the torque specs for a 2000 Chevy Impala 3.8 liter?
What are the torque specs for 2000
Chevy Impala 3.8 Litre ?
Where is the air filter located on a 2001 Volkswagen Passat V6 and how do you change it?
I have a 1999 and the air filter is all the way on the upper left hand side after you open the hood, remove the plastic and the big vacuum looking hose, you can see the housing for the air filter. It is a huge pain, clamps are really tight and you are better off just paying to get it done. It usually costs less than the air filter itself if you bought it yourself.
http://www.tobio.info/passat/howtos/passat_air_filter.HTML
Could you tell you how many bolts are in the intake manifold on a 93 ford probe?
If its the v6 there are 8 bolts and 4 nuts.
Does the 2007.5 2500 dodge ram have a cabin filter?
I don't believe that it was an option until the 2009 model year.
I don't believe that it was an option until the 2009 model year.
You tried to start your car but it made a loud pop and smoke came out of the hood?
It happen to me today and Firestone said that $ 916.86 worth of repairs were needed, even before they could tell me what else was wrong with the Ford Explorer. 109.99 for the "Engine Diagnostic Service". 278.99 for RY116 Furl Pressure Regulator(229.99), removal & Replacement of Fuel Pressure Regulator Module, 89.99 for a Fuel system tune Up (EK11Y Ever Wear Fuel System Cleaner-2 -3499), Replacement of all vacuum lines for Fuel Pressure Regulator ($ 296.00) which includes 7006999 vacuum Tubing & Lines (64.99). $ 329.97 for Parts and & 509.99 for labor and $ 25.00 for shop supplies plus 51.90 in Connecticut State Sales Tax. Again the total was $ 916.86 and they said this was just to get it started. There might be other issues that they would not know until they got it started (you've got to be kidding!)
This one is going to end up in the State Attorney Generals Office!
How can the Toyota Sienna 2004 model air filter be changed by owner?
The same way the mechanics do it.
How do you get at the air filter in an 1987 supra turbo?
it is located behind the right front headlight. take off the intake hose going into the turbo and it should come out with ease
Where is the air filter in a 2005 Pontiac Vibe?
The cabin air filter is inside the glove box.
[IMG]http://i19.tinypic.com/4mi3tds.jpg[/IMG]
[IMG]http://i17.tinypic.com/5x4lov7.jpg[/IMG]
What is the foot pound torque for front brake rotors on a 1978 VW Bus?
Consult a generic torque specification chart based on the size and grade of the of the bolts (top of bolt will have that info on it).
What will cause coolant to get in oil head gasket or intake gasket?
The Intake gasket is leaking, NOT THE HEAD GASKET. Replace the intake gasket
Well, you have spent allot of money and the problem is still there. It can be many things. My guess would be vacuum leak. Replace all vacuum lines, (cheap fix and probably needed anyway due to the age of the vehicle) and see if that fixes it. If not, Stop throwing parts at the problem and take it to a professional and have it fixed. You would be money ahead if you had done that in the first place.
What would the estimated horsepower on a 1997 Honda civic ex with aem intake and dc headers?
well cold intake ranges from 5 to 10 hpput a K&N cone shape filter on it..... the header is probably around 10 hp. Now are u gonna do a full exhaust or just a header? i would personally do the whole thing header free flowing cat or no cat depends on your emission laws, and a performance muffler... Depending on your budget will depend on what u get i would say cat-back 2.5 in pipe and at least a 100 dollar Can. it will roughly cost 200 to 300 dollars for the cat-back and maybe 500 plus for header and then catback.
Why does 99 Mercedes ML320 dipstick smell like gas but leaking oil does not?
If the dipstick of a 1999 Mercedes ML320 smells like gasoline there could be a gas leak dripping into the oil pan. The engine needs to be checked for leaks to avoid any serious damage to the vehicle.
2000 s10 4.3L engine knocks after intake manifold gaskets replaced why?
Sounds like something was droped into the engine. I would also like to know why you changed the intake gasket.
If it was leaking water/ engine coolant into the cylinders then you may have damaged / broke a piston are bent a rod. Water will not compress.
Is there an air filter that sucks in co2?
Air filters for vehicles must draw in oxygen-rich air in order to produce good clean combustion.
SCUBA rebreathers, on the other hand, do scrub the Carbon from Carbon Dioxide and send Oxygen back to be re-inhaled by the wearer.
What is the type of air filter for this vehicle?
Air filters clean the air entering the engine from harmful contaminants, ensuring optimal working conditions and reducing abrasion by friction engine components interacting
In the process, the internal combustion engine (ICE) consume large amounts of air. Established that (on average) for the combustion of 1 liter of fuel required as many as 10 000 cubic decimeters air, which, depending on the climate and season contains various types of pollution, such as dust, pollen, insects, etc. They can cause damage to the engine, thereby significantly reducing its service life. That is why the filters kotoryemogut hold up to 99.9% of impurities in the air and falling into the engine air intake system built into the car.
Air filters consist of a hood, located near the engine, and a replaceable filter tips (cartridge).
By design, the air filters are divided into light, used in passenger cars, pickup trucks and SUVs, and heavy, mounted on trucks. Light filters have a rectangle or circle. Round filters are used in the older cars, and have a relatively small amount of filter material compared to the body. In this sense, the rectangular filter is much better. Therefore, they are used in new models of cars. Another advantage of the panel filters - their ecological value. Most of these filters do not contain metal parts, which facilitates the processing of used filters.
Oil filters effectively remove from the engine or transmission oil harmful pollution resulting from abrasion and degradation of engine oil into each internal combustionengine(ICE), a oil filter. Their function is to prevent the entry of any external contamination in engine lubrication system, and at the same time to remove any contamination that was created during engine operation. The main sources of pollution: particulate matter trapped in the combustion chamber with the air and fuel, wear products moving engine parts, water and carbon residues formed during the combustion process, the results of the collapse of the engine oil.
Modern engine oil filters are different designs. They can be divided into two groups, according to a method of preventing contamination. Barrier filters, which is used as a cleaning layer porous material absorbs pollution when oil flows through it. Energy filter, which is separated from the oil pollution in the vortex field of gravitational and magnetic forces. Engine lubrication system equipped with one or the other type of filters, or both simultaneously. The use of a suitable type of filter in the lubrication system of the car is its type and is determined during the development of the engine.
Placing two filters in the lubrication increases cleaning efficiency and extending the duration of the filters. Fuel filters provide a complete cleaning of the fuel particles of particulate matter, especially dangerous for elements of the fuel system and engine. Fuel supply advanced engine includes many fine elements, whose correct operation is required for the smooth operation of the engine. Fuel pump, carburetor or injectors are very sensitive to any impurities in the fuel. Determined that each liter of fuel may contain up to a milligram of various impurities. Special filters are installed in the fuel system of the vehicle to provide the best operating conditions of the engine, and extend the life of its parts. The purpose of these filters is to remove solid components, water, paraffin embedding of the fuel, and precipitation of organic matter (bacteria in the water that enters the fuel). Real efficiency fuel filter depends on the quality of fuel used, as well as the structural features of the engine. In the carburetor fuel systems of gasoline engines with filters 99% efficiency retain particles up to 8 mm in diameter, and fuel injection systems, filters achieve the same efficiency only with particles of diameter 3.2 mm. Obtaining such a high degree of purification and, at the same time, maintaining a long filter life, made possible by the use of multi-stage purification. All filters used in the fuel systems - flow, and therefore all of the fuel that enters the combustion chamber must pass through them. Moving from the fuel tank to the combustion chamber, the fuel is at least through one filter, but sometimes even three.
Hydraulic filters are adapted to operate in extreme conditions due to high pressure and dynamic changes in oil consumption. During the entire period of operation keep the high efficiency removal of contaminants from the oil.
Hydraulic filters are used in various devices and mechanisms, often working under difficult conditions. The reliability of the hydraulic system depends, in large part, on the properties of oil and reliability of each element (pump, servo, filling, valves, etc.) are subject to high pressure, friction and other mechanical influences. To ensure the best operating conditions of hydraulic special filters to clean the hydraulic oil.
The company is in Russia Dalasi automotive filter "Sakura", "j-Sakura" The products of these brands for a long time on the Russian market and has established itself only in a positive way. ISO 9000 and 9001, the system 100% quality control at the end of the process, a wide range of products, including filters for heavy equipment and hydraulic systems, and low price make them very attractive to the consumer. Filter JSakura / Sakura - are available for each vehicle and prolong the life of your engine.
How do you repair the manifold intake gasket on a 91 Honda Accord?
there are 7 12mm nuts on the manifold and 2 bolts on the manifold brace-remove the brace from underneath and the oil filter and you should be able to get to the nuts on the bottom--the ones on top you should be able to see and get a wrench on from the top-take it lose and push it back to clean and reinstall
How do you change air filter on a 2007 Mazda 3?
The air filter is below the battery air duct. Pull up on the cover of the battery compartment to remove it. Unscrew the plastic "screw" attached to the air duct which is furthest towards the front left corner of the car. Once that screw is out the entire air duct will come off (no need to remove the other "screws"). Under that you'll see the air box. There are four metal clips (one on each corner) that you need to release before the cover will come loose. It will lift up only slightly without removing anything else from it, but that should be enough to slip the filter out and slip the new one back in. You may need to lift up the lower part of the cover (nearest the engine) to allow the filter to seat properly in the box. Reverse disassembly and you are finished.
