0
EGR Systems
When the temperature in the combustion chamber becomes extremely hot, nitrous oxides are formed, which then turn into smog. In order to reduce such occurrence, the exhaust gas recirculation system minimizes the temperature in the combustion chamber.
1,560 Questions
If you need to replace the barrel for a Crescent 12ga double where can you purchase a set?
I found a set for my Enders Special Service a.k.a. crescent on eBay of all places. It took some time and alot of questions, pictures and measurements but was worth the wait. There are many barrel sets that will fit with a little tinkering.
Where is the EGR on a 1996 Dakota 3.9L V6 located?
There should be an "Emissions Adjustment and Routing" label on the underside of the hood that shows a vacuum hose routing schematic and the location and name of the different emmissions control assemblies. It'll give you an idea where to look. On my '92 3.9L V6 the EGR is located on the top rear of the engine, between the throttle body and the firewall.
WRONG.
in 96, the dakota's did NOT have the EGR. those were in the earlier models like your 92.
Anyone know anything or anywhere to find an egr valve sensor for a 2002 Dodge Stratus RT with ABS?
An EGR valve sensor should be available at any dealership parts department, and almost any auto parts supply store.
Where is the egr valve located for a 1998 Chevy Tahoe?
Off the front of the intake between the alternator and the A/C compressor
What causes a '93 Civic to idle rough and want to die when the AC is on?
When you turn the ac on it engages the ac clutch which is turned by a fan belt which is turn by the engine. you are making the engine work harder. The idle speed might be set to low or it,s time for a tune up.
Where is the egr valve on a ford 5.8l located?
egr valve on 5.8l is located on top of engine, passenger side front bolted at intake
Where to find and how to replace a DPFE sensor on a mercury villager?
I'm not aware that part was installed on Villagers. It would be on the EGR valve if it was.
Where is the location of the egr valve on a 2005 dodge grand caravan 3.8 liter?
right above the alternartor, but you will have trouble getting the bottom bolt out. Does anyone have an easy way to remove this bottom bolt?
Where is the egr valve located on a 2002 Chevy s10 4.3?
There is no EGR valve on the 2002 4.3L (code W)
How do you test for if an EGR valve needs replacing on a Taurus - Sable?
Testing steps: * Remove the vacuum hose on the top of the EGR valve and plug it.
* Connect a short hose to the EGR valve.
* Start the car.
* Now suck on the hose, or use an appropriate tool to apply suction to the line * this will open the EGR valve the engine should stumble and try to die.
If it does the EGR valve is working. There is an "Exhaust gas manifold pressure sensor" that measures the exhaust gas flow to the EGR valve. The problem is the sensor itself becomes clogged with exhaust carbon and gives the computer a fixed false reading, the computer in turn sends too much vacuum to the EGR valve and the engine runs rough, surges and may die.
This sensor on the 3.0 cast iron engine ( overhead valve no overhead cam ) is located by the firewall on or near the intake manifold and is connected to an exhaust tube running to the EGR valve by 2 short rubber hoses and has a 3 pin connector.
The hoses measure pressure drop across a restriction inside the tube as exhaust gas flows through it to the EGR valve.
I've replaced the sensor on 2 different Taurus', my wife's 99 and my sons 2002, the cars run great afterwards and the light goes off.
About 40 bucks do it yourself easily. Twist the old sensor to loosen the hoses. Push the new sensor onto the hoses. The other engines should have a similar sensor somewhere.
From my limited understanding a DPFE is part of the EGR system and its actual name is Differential Pressure Feedback (I am not sure what the E is for) My knowledge of this stems from getting an ODB code P0401 and trying all fixes to the EGR Valve, Flow Sensor and still not being able to remove the code. I found reference to this part from another site don't remember which one though sorry. Hope this helps a little. DPFE stands for the differential pressure feedback EGR system sensor. It's part of the EGR system. In Fords and Mazdas, it seems to be one of the first parts to defect when a P0401 signal is detected.
Where is the evaporative canister on Grand Am?
on the 1996 grand am the evap canister is located on the passenger side, in the fender. would need to remove the coolant reservoir to reach.
Where is the PCV valve for a 1990 LeSabre?
The elusive PCV valve does not leap out at you on the '90 LaSabre. Since, if your engine and it's spark plug wiring wiring is configured the same as mine, and hopefully it is for the sake of this answer, the PCV valve is hidden beneath those wires and, mostly, is further camouflaged by oil. Anyway, here's how you find the little sucker: As you stand next to your left tire, looking into the engine compartment, follow the 3 rear spark wires, from rear to front, ABOUT 3 inches PAST the REAR rocker arm cover. Pull the wires aside and look down a bit. There, at what might be called the south-west cornor of the rectangle engine block, if you consider the way you are facing to be "north", is the PCV valve. It's real close to the engine block. It fits stright down into its gromet with the hose the conects to the top/plactic part of the valve being only an inch long.
How much does it cost to replace shocks?
It depends on the year, make and model. Americans cars are cheaper the foreign cars. It also depends where you take your car as far as cost. Make sure you ask about warranty, most shocks come with life time warranty. If you want to save money ask family/friends/neighbors for advice on inexpensive shops. You can find some used good condition shocks at salvage yards if you don't plan on keeping your car. Cheers!!
hi the black smoke is your injectors should get them checked out.
if they are the electrical 1s, they charge to test them, if they the non machincal version its free to test them.
Where is the egr valve located in 1996 Nissan Maxima se?
see the egr valve location on the 1999 Nissan Maxima-it should be very similar.
How do you unclog the EGR valve passages?
You don't. In my book they are items that if damaged or clogged they should be replaced. A new one will run you $8-$20 if you do the work your self.
Where is the EGR valve on a 1997 Isuzu Rodeo v6 3.2 liter?
hope this picture speaks louder than words...g'luck http://www.icess.ucsb.edu/~greg/rodeo/egr.htm it is on the driver side towards the cab, it is just sitting on top of everything, that is about all i can say on it, hope that helps.
Where is the EGR valve located on a 1996 Nissan 200SX How do you clean it?
its under the intake and i would wipe it down with a rag if it needs it you might have to clean the line though
