0
Timing and Firing Orders
Firing order refers to the order of power delivery of the cylinders in an engine. Timing and firing orders both contribute to the engine’s fuel economy, power, and longevity. Achieving the proper timing is critical in the engine’s performance.
6,170 Questions
What are the firing orders for ford engines?
This is a very vague question. Almost all engines have different firing orders. You need to ask for the firing order for what model engine you have or need.
What is correct routing of spark plug wires for 1978 Chevrolet El Camino V8?
1,8,4,3,6,5,7,2 Number 1 is the front one on the driver's side. Next is 3,5,7 Number 2 is on the front of the engine with 4,6,8 behind.
What is the firing order on a 2002 Ford Mustang 3.2 6-cylinder?
Ford makes no 3.2 V6. If your Mustang is a V6 it is a 3.8 Liter. I will add a link for you to see the correct hokup of plug wires. The firing order of the 3.8 V6 is 1-4-2-5-3-6
What is the firing order on the distributor for a 1991 5.7 V8 Chevy Caprice?
Chevy 5.7 L firing order is 1-8-4-3-6-5-7-2 clockwise.
Which way does the timing marks go on crank and cam?
all motors are different, need to know year make, model and motor to tell.
Where is number 1 on distributor for 1983 Dodge 360?
# 1 on the distributor cap faces to the FRONT / CENTER
I would suspect you need a new timing chain or belt depending on which is installed. A worn belt or chain will jump time.
What are the timing marks on a 92 Isuzu pickup with a 2 6 fuel injected engine?
There are three marks to line up... before you remove the lower timing belt cover there are the marks on the little gauge that is integrated into the cover that line up with a mark on the main crankshaft pulley (to actually time it while the engine is running) there are also marks on the camshaft sprocket (big sprocket at the top of the engine seen with the upper timing cover removed), that lines up with a white mark on the upper rear plastic timing cover. And finally if you replace the timing belt there is a mark on the crankshaft sprocket that lines up with a mark cast in the face of the aluminum engine block. mnemonic76 1988 Pickup owner
What would cause no spark on a 1999 Honda Civic EX after replacing spark plugs and wires?
Likely Culprits: Bad Coil. Bad Ignition Control Module. Great Resources:
How do you set the timing on a 79 camaro after installing a new distributor?
set cylender one at top dead senter then point thr rotor at cylender one that will set the distributer then turn the cap to finish the timing that always works for me
What is the timing spec for 1970 international truck 345 engine?
I don't know for fact, however, if you cannot find it under the hood somewhere, on a sticker, then, I would just put it at, say 4 degrees before top dead center, or advanced, and go from there. On an older vehicle like that what they say to set it at, and what it has to set at, are two different things. It may not run right at the figure they give, due to todays gas qualities, and maybe a little bit of carbon build up on the top of the pistons which ups the compression ratio further. I would start with it about there, and if it doesn't ping, run-on, or crank slow when it is hot, leave it. Your altitude will factor in as well. I would bet that they recommend 4-6 degrees advance, anyway.
What is the firing order for a 1997 Pontiac Grand Am GT V6 3100?
1997 3100 V6 GM Firing order Answer1-6-5-4-3-2
What is the firing order on the 1999 dodge neon?
The order of the ignition coil is 1 (one) to 4 (four) starting from the UPPER LEFT going CLOCKWISE to the UPPER RIGHT with the ignition coil connector facing RIGHT.
The order of the spark plugs is 1 (one) to 4 (four) starting from the FAR LEFT to the FAR RIGHT.
1 - 2 - 3 - 4 (ignition coil)
1 - 2 - 3 - 4 (spark plug)
The firing order is 1-3-4-2
A visual diagram is available at http://autorepair.about.com/library/firing_orders/bl-fo-3760.htm (DOHC) and http://autorepair.about.com/library/firing_orders/bl-fo-3761.htm (SOHC)
Firing order of a five cylinder engine?
Please ask your question again and include more information in it. WikiAnswers is designed to provide a specific answer to a specific question.
- Questions that do not contain enough information cannot be answered - asking "did he die?" or "how did she become rich?" cannot be answered because we do not know who you are asking the question about.
- Multiple choice questions cannot be answered because you cannot include the choices in the question. These typically include the phrase "which of the following" at the beginning of the question and the questioner does not include "the following" choices in the question; thus, we have nothing to answer your question.
- General questions usually cannot be answered because it would take an entire website or a textbook to do that - questions such as "Explain biology" or "What are the names of all cars ever made?" are too broad to be answered.
- Questions that require us to look at a picture or diagram that you have in front of you cannot be answered because we cannot see your assignment page.
- Questions that must be answered with the questioner's opinion cannot be answered by anyone except you - job application questions such as "Why do you feel you should work for this company?" or "Where do you hope to be in five years?" cannot be answered by another person.
- Partial questions or question fragments cannot be answered - a sentence fragment such as "preparation for a position" or "pi plus" do not explain what your question is, and cannot be answered.
- Questions that are actually statements cannot be answered because they are not questions. "You are in love with a boy and he does not know you exist" is not a question and cannot be answered.
- Questions that should be asked in a chat room cannot be answered because this is not a chat room. "Who are you?" or "What is your favorite color?" are not questions that can be answered on this website.
The WikiAnswers Style book will help you write a proper question that can be answered for you. See related links below.
Tip: Don't use pronouns such as he, she, it, them, their, his, her, it's, and so forth in your question. Chances are, we won't know who she, he, them, and what it is and won't be able to answer your question. You must indicate the subject properly in your question. However, questions in which the subject is already indicated within it, may use those pronouns, ex: "When Miley Cyrus starred on Hannah Montana, how old was she?" is okay.
Time Zone Questions with Insufficient InformationWhen asking about the time in different places around the world WikiAnswers can only answer if we know (1) the place of interest and (2) a reference point.
Bad question that can not be answered: What time is it now in England?
Good question: What time is it in England if it is 11 AM in Perth, Australia?
Bad: What is the current Central Time?
Good: If it is 2 PM in San Francisco then what time is it in Central Time?
Bad: If it's midday in the US what time is it Japan? (What time zone in the US?)
Good: If it's midday in Chicago what time is it in Japan?
Bad: How many hours is Tonga behind?
Good: How many hours is Tonga behind Tahiti?
The differences are quite clear.
It might make sense to YOU when asking but please note that it might be hours or days before someone looks at your question. In the examples above for bad questions, do you see how someone answering might be, well, a bit flippant and just say "8 PM", or "Evening", or even "Working time"? And that would not really help you out, now would it?
Just for reference: Russia has 11 time zones; Asia has up to 8 (depending on how you count); the USA has 6; Australia has 6 (more or less, depending, some with, some without DST); South America and Africa have 4; Mexico has 4 (one of which does not observe DST); Europe and Greenland have 3; and the middle east has a whole fistful.
Time zones between areas or countries may be as little as 15 minutes apart or as large as 120 minutes. Memphis Tenn. USA is NOT the same as Memphis, Egypt. Be specific -- Help us to help you!
If you believe that your question has sufficient information to be answered and should not have been placed into this catch-all question, please e-mail WikiAnswers @ Answers.com and request that it be made into a separate question.
How do you change a timing belt?
answer
if you have an old car by the book,there is atrick to it that holds the timing cam chaft pullrey and crnkshaft pulleys they hold them place for perfect iming and change the oil seals cam and crank because it takes a llot of work so that you dont need to go back for them seals,if you still have a brand new car then dealer they do excellent perfections in timing belts and water pumps,specially oil seals and timing jeeze if you want it alittle loose that will be the perfect timing,hope it helps!
