0
Mazda 929
Also known as Efini MS-9, the Mazda 929 was a mid-size car manufactured from 1973-1987. Originally, this vehicle was powered by a 1.8 L I4 Mazda VB engine, which can generate up to 94 hp and 104 N·m.
175 Questions
i cant open my boot on my 55 focus either by remote or the button on the boot how can i fix this please
What are the correct names of the ecm and egi computers for 1995 Mazda 929?
The computers are called PCME (powertrain control module engine) and the PCMT (powertrain control module transmission)both are under dash behind glove box ...
hope this helps
Jess
Where is the fuse box located in a 1983 Mazda 929?
Son has a 1983 929 wagon. Fuse box on it is situated driver's side kick panel about 300mm from floor. Black box anout 100mm square.
High pressure tells me of a possible head gasket problem. Have the cooling system pressure tested by a reputable garage; this will answer some questions.
How reliable is a 1991 Mazda 929?
Having a 90 929 I would say it is the most overly engineered, unthought out piece of machinery that I have ever owned. Its wonderful to drive but if something goes wrong its nothing but one big headache. Finding parts generally involves wait times and working on it needs someone with tiny hands. I will not buy anouther one. I have had this one for 3 years and put one 40000 klicks. Having a 90 929 I would say it is the most overly engineered, unthought out piece of machinery that I have ever owned. Its wonderful to drive but if something goes wrong its nothing but one big headache. Finding parts generally involves wait times and working on it needs someone with tiny hands. I will not buy anouther one. I have had this one for 3 years and put one 40000 klicks.
Where can you find a fuse box map for a 1993 Mazda 929?
WHERE IS THE FUSE BOX IN MY 929 MAZDA AND WHERE. HOW DOES THE ENGINE CHECK LIGHT LOOK AND LAST WHY IS IT ON AND STILL RUN
Where is the Location of odb connector Mazda millenia 1999?
The 1999 Mazda Millenia OBD 2 port is on lower right corner of dash; next to tunnel
on my 929 93 I had the same problem, I notice there is an screw that is not in place. I had to replace it. HAve one of your friends help you by presing the sunroof on one side Dow wile you press the button back and forward, then on the other side if it goes in complitly the n you have the same problem .
Where is the thermostat in a 1993 Mazda 929?
The thermostat on a 1993 Mazda 929 is located on the top of the motor just before the manifold covers. Look for the largest hose coming from the radiator at the top and trace the length of the hose back to its connection to the motor and the thermostat is at the point the hose connects to the motor.
How do you bypass the remote start system on a Mazda 929 It won't crank with the remote or key.?
Check to see if the shifter is not all the way into park. If it is Your neutral safety switch my be inoperative. The remote goes through the body control module to the neutral safety switch. Good luck!
How do you remove the driver's side door panel on a 1992 Mazda 929?
Remove the door handle trim inside (one screw). Remove the plastic speed screw under the door panel (look under the door panel) Remove the screw located under the material located inside the door handle (looks like a piece of carpet. pop the panel loose. disconnect the wires and remove door panels. TIP *** Tighten all the screws to make the door solid like when it was new and reduce rattling. I Recommend removing all screws and filling all the post with JB Weld and let dry, drill the holes out. Then reassemble the door panel pieces. This will allow you to tighten the screws without stripping the plastic standoff posts.
what is the valve clearance for the mazda b2500 engine
How do I know if the struts are bad?
If the struts are gone, the vehicle will bottom out easily and will tend to continue to bounce after giving a corner of the vehicle a hard shove downward. The vehicle will tend to roll more in corners as a result and will not handle as well as it should.
How do you make the CD player and radio work on a Mazda 929 after battery change?
Check your handbook and you will find a code number to put into the player via the front knobs this will then start it back up again. It should be in the back of the handbook with the sales details and i.d. numbers for the car.
How do you replace the water pump on a 1992 - 1996 Mazda 929?
Hi Its located under the timing belt cover......better plan on replacing the timing bet too
Where is the fuel pump relay on a 92 Mazda 929?
it's in the trunk on the left side as if ur standing behind the car. take out the covers and u'll see the cover. its two covers on the top and bottom right underneath the left speaker.
Where are spark plug holes in tracker engine?
If you are referring to the 4 cyl engine, there are caps covering the spark plugs and you can remove the caps with a Philips head screwdriver. Gently pulling the plastic up will reveal the rubber hole cover and the spark plug hole.
The fault must be cleared using a tester. This is a general answer, as in for many cars...yours may require a manual reset: After correcting the problem, say replacing the Mass sensor, the light will reset but only after the car has the opportunity to run through all it's checks and the computer agrees. This can take a few miles or even several hundred, and sometimes requires a few turn on and offs. Alternatively, if you made a good guess, even checked the code, but didn't fix all the things causing the CEL to go on, it isn't going to go off!
How do i Drain Mazda 929 radiator?
This procedure s fairly generic so it should suit most makes of vehicle, but you should always consult your vehicle manual for acurate servicng and to help you locate parts specific to your vehicle.
* First remove the Radiator cap. * Un-do the bottom radiator hose clamp with a screw driver or spanner.
(either at the engine block side or radiator side which ever is easier to access)
* Next remove the hose from the outlet by manipulating it with your hands (boiling water poured on the outside of the hose can help here) * Let all the fluid run out of the radiator and engine block (into a recepticle for diluted disposal in garden)
Job done.
If you were to refill the radiator...
* Flush the radiator out with a hose from top to bottom until the water exiting runs clear
To be thourough you should also remove the thermostat and flush the engine block from the top (and replace the thermostat with a new one).
* Refit the hoses and tighten hose clamps.
* Slowly refill the cooling system with a decanter of water and engine coolant
* Check all hose clamps are tight and start engine - leaving the radiator cap off.
* run engine till it reaches standard opperating temperature or beyond and all air has escaped the sytstem this part is very important.
* once it has returned to standard operating temperature replace radiator cap.
* carry water in your car and watch the temperature guage while driving.
* In the days following the flush recheck the hoses and level of radiator to ensure the fluid doen't leak out. Good luck...
Hi, more information would be helpful! my 1989 929 has idle problems, it runs real bad if you dont let it warm up long enough but once warmed up has problem idleing, makes the car shake alot as if its about to stall, and then when stopped sometimes actually stalls. Is your car doing the same?
How do you view the inside fuse cover in your 1992 Mazda 929 when it shows two ways in the book?
open the cover and read it
Where is the fuel pump relay for a 92 Mazda 929?
The fuel pump rely is located in the trunk in the compartment in between the rear speakers a small black rubber plug.
Where is the fuel pressure regulator located on a 1995 Mazda 929?
It is located behind the center of the plenum. Which some would consider the intake on this particular car. It is the little round thing up close the center of the fire wall on the car. It is kind of hard to see. It is easier to find if you follow the fuel hose behind the intake.
